LABORATORY EQUIPMENT

WATER AND OIL  BATH
http://www.memmert.com/fileadmin/html/header/wasserbad-WNB-WNE-WPE/wasserbad-WNB-WNE-WPE_gen2012_en/bg_wasserbad.jpg

The Memmert waterbath is available in six model sizes and two performance classes. In addition to the Basic class for standard temperature control tasks, the Excellent version provides precise test procedures with a maximum of safety: electronic overtemperature control and a wide range of visual and acoustic signals; for example if the filling level is too low, for overtemperature, but also for input acknowledgement or to signalise the end of the programme. In the largest model, an optional circulation pump provides an even better thermal uniformity of the water.

  • Temperature range up to +95 °C (with Peltier cooling unit CDP 115 from +10 °C)
  • 6 model sizes (7 l to 45 l)
  • An extensive range of optional accessories is available: e.g. a Peltier cooling unit, flat or gable cover, shaking device, floor shelf, test tube rack
  • State-of-the-art control technology of the Basic and Excellent performance classes for all models
  • Can be optionally equipped with water level control

.

                DIGITAL OVEN

Whatever you want to perform: material tests, ageing of computer chips, run complex experiments with highly sensitive loads, drying or tempering electronic components, hardening plastic resin or heating plasticine. Our U universal oven stands for unparalleled precise, even and gentle temperature control.

  • Temperature range up to +300 °C
  • 9 model sizes 32 l to 1060 l
  • 2 model variants: SingleDISPLAY and TwinDISPLAY
  • Natural convection or forced air circulation N/F

                CLIMATE CHAMBER
http://www.memmert.com/fileadmin/html/header/klimaschrank_ich_gen2012/klimaschrank_ich_gen2012_en/bg_klimaschrank_ich_gen2012.jpg
Its excellent temperature and humidity homogeneity positions the climate chamber ICH in the international top league of stability test chambers. Thermal transfer to the interior – whether heat or cold – is guaranteed through a large-area air jacket on four sides. Thanks to its hermetically sealed interior, the climate chamber ICH does not consume any water once the setpoints have been reached, provided that the door is not opened. Two high-grade platinum temperature sensors with mutual monitoring guarantee interruption-free long-term operation even if one sensor should fail.

  • 3 models: Climate chamber ICH 110/260/750 temperature/humidity, ICH 110L/260L/750L with light, ICH 110C(260C/750C with CO2 control 
  • Temperature range from - 10 °C to + 60 °C (models ICH), 0 °C to + 60 °C (models ICH L and ICH C)
  • Model sizes 108 l, 256 l, 749 l
  • 1 model variant - TwinDISPLAY
  • Digitally controlled active humidification and dehumidification from 10 to 80 % rh
  • Double doors as standard: Prevention of contamination and drops or rises in temperature with an optimal view of the chamber load through wide-area interior glass doors.

HUMIDITY CHAMBER
http://www.memmert.com/fileadmin/html/header/FeuchtekammerHCP/FeuchtekammerHCP-gen2012_en/Feuchtekammer.jpg
Does your application temperature lie between 8 °C above room temperature and 90°C, with controllable humidity? Then the Memmert humidity chamber HCP is unbeatable in price, performance and comfort. The almost unlimited programming possibilities of temperature profiles make ideal environmental conditions for the load possible.

  • Temperature range up to +90 °C (without humidity up to +160 °C)
  • 3 model sizes (108l, 153l and 2461)
  • State-of-the-art control technology based on the P performance class for all models
  • An active humidity control system is integrated as standard in all models
  • Double doors standard for all models: Prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors
  • For all models, the inner chamber, including the ventilation system, the water trays and all sensors, can be sterilised at 160 °C in a 4 hour programme using the standard STERICard

INCUBATOR
http://www.memmert.com/fileadmin/html/header/brutschrank_gen2012/brutschrank_gen2012_en/bg_brutschrank_gen2012.jpg
In the laboratory, our incubator is ideal for all applications with temperatures up to +80°C – specifically for incubating living cultures at +37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, valuable loads are therefore warmed up particularly carefully.

  • Temperature range up to +80 °C
  • 8 model sizes 32 l to 749 l
  • 2 model variants: SingleDISPLAY and TwinDISPLAY
  • Natural convection or forced air circulation N/F
  • Double doors (interior glass, exterior stainless steel) for a clear view without a drop in temperature
Activation of sterilisation routine via ControlCOCKPIT (TwinDISPLAY)

AUTOCLAVE
Compact Top Loading Autoclaves from Astell
Compact Autoclave - 63 Litres
The Compact 63 litre top loading autoclaves require no plumbing and operate from a standard single phase supply. Available in two versions; they are idea for a medical application.

‘Classic’ and ‘Autofill’ models are available.

Classic - Classic - The ‘Classic’ version with heaters in the chamber requires manual water-fill before the cycle commences. It has the facility for condensate to leave the vessel via a silicone tube during the cycles which can be connected to a heat resistant bottle for collection.(More info)

Autofill - The ‘Autofill’ version has an integral reservoir. Once filled, this provides water for up to 15 cycles, and also acts as a collection vessel for condensate and the water that is automatically returned from the chamber at the end of each cycle. (More info)

  • A self contained design with no installation required -just fill it with water and plug it in and the machine is ready to be used
  • A choice of two different 63 litre models
  • A fully programmable Touch Screen Colour Controller
  • An electro polished stainless steel chamber
  • A base shelf within the chamber
  • An ultra quick Swiftlock door mechanism
  • A full range of Options & Accessories to meet your exact requirements
  • A pulsed-heat drying system, which is adjustable in 5 minute steps (available when running a non-fluid cycle. Not suitable for drying fabrics or porous loads) Available on Autofill models only.

Astell Benchtop Autoclave

Astell Benchtop Autoclave Range
Astell’s front loading Benchtop autoclaves are available in two versions. Both require no plumbing, and operate from a standard single phase power supply.

‘Classic’ and ‘Autofill’ models are available.

Classic - The ‘Classic’ version requires manual water-fill and during the cycle condensate leaves the vessel via a silicone tube that can be connected to a heat-resistant bottle. (More info)

Autofill - The ‘Autofill’ version has an integral reservoir. Once filled, this provides water for up to 15 cycles, and also acts as a collection vessel for condensate and the water that is automatically returned from the chamber at the end of each cycle. (More info)

The Benchtop Autoclave range features:

  • A choice of 33, 43 and 63 litre models
  • A fully programmable Touch Screen Colour Controller
  • An electro polished stainless steel chamber
  • A base shelf within the chamber
  • An ultra quick Swiftlock door mechanism
  • A full range of Options & Accessories to meet your exact requirements
  • A self contained design with no installation required - just fill it with water and plug it in and the machine is ready to be used
  • A pulsed-heat drying system, which is adjustable in 5 minute steps (available when running a non-fluid cycle. Not suitable for drying fabrics or porous loads). Available on Autofill models only.

Astell E Range Autoclave

STEAM GENERATORS
Astell Stand Along Steam Generator

Stand Alone Compact Steam Generators - 24kw - 48kW
Astell manufacture a range of stand-alone steam generators for use either with our autoclaves and sterilizers, or for direct steam supply in the pharmaceutical, medical, food and beverage industries. Astell steam generators are designed with peak demand in mind, making them ideal for sterilizers or other systems that require instant steam in short, high demand systems.
All Astell steam generators are manufactured with stainless steel pressure vessels and stainless steel pipework, which eliminates the contamination associated with mild steel/copper systems. If you require a larger autoclave (600 litres +), please Contact us to discuss your requirements.
Astell Steam Generators are designed with peak demand in mind making them ideal for steam sterilizers or other systems that require instant steam in short, high demand systems. Stainless steel boilers and pipework reduce contamination caused by mild steel systems.

SPECTROPHOTOMETER
DR 3900 Benchtop Spectrophotometer with RFID* Technology
The proven technology you have come to expect from Hach just got better. Built with the future of water analysis in mind, the DR 3900 Spectrophotometer will give consistently accurate results in a simpler testing format.
If you need a portable solution, please call customer service at +234 8091009999 for the availability of DR1900.

  • Traceability starts with sampling
  • IBR+ increases the reliability of your measurement values
  • Rapid data updates
  • Quality assurance made easy with AQA+
Alignment of laboratory and process analysis

LAMINAR FLOW
http://monmouthscientific.co.uk/image/data/Laminar%20Flow/Web-HLFT1200Airflow.jpg

The brand new Monmouth Scientific Circulaire® HLF-T1500 Horizontal Laminar Flow Cabinet is designed and manufactured in the UK by our own engineers. This means that we are able to offer features, benefits, quality, service and support that are second to none.
The Circulaire® HLF-T1500 conforms fully to BS EN 14644 and offers clean air to ISO Class 3 (Class 1). To ensure compliance, the cabinets use U15 ULPA particulate filters for the very best in product protection.
The whole Circulaire HLF-T range of cabinets are fitted with the latest digital fans to ensure low noise operation and low energy consumption. Energy efficiency is improved further with the use of internal LED lighting and PIR movement sensors to shut off all non-essential electronic items when the cabinet senses a period of inactivity. Typical power consumption for the Circulaire® HLF-T1500 is just 80 watts!!! This makes the power consumption a mere fraction of rival cabinets. In addition, the use of digital fans brings noise levels below 54db(A).

TORQUE TESTERS
Helixa-i testing Luer locks
Precision Torque Test Systems
The Helixa is designed for precision design applications, where torque forces may be very small and where accuracy is paramount. Its counterbalancing mechanism allows the removal of axial force, whilst also enabling the application of precise top-load or tensile force when required. The drive spindle can be user-aligned for precise concentricity with the intelligent torque cell. Our experienced engineers can design and manufacture custom fixtures for your specific sample profiles.

  • Controlled by Mecmesin’s powerful Emperor™ software
  • Balanced to remove or apply axial compressive or tensile force
  • Precise drive-to-loadcell alignment for extreme low torque testing
  • Measurement from a few mN.m up to 6 N.m

The Helixa accepts interchangeable intelligent torque cells for measurement from just a few mN.m up to 6 N.m, with a resolution of 1:6,500 and an accuracy of ±0.5% of full scale.
Available also as a touch-screen model, the Helixa-xt, with all the same features but the convenience of a self-contained unit.

Torque tester_Vortex-xt_210
The Vortex-xt - taking torque tests straight onto the production floor
The Vortex-xt brings Quality Control torque testing direct to the point of production. Only two clicks on the touch screen interface are needed to start making routine torque measurements, with instant and clear pass/fail verification. For added versatility, more complex torsion tests can be programmed, stored and accessed by specific users, with a range of calculations available for data interrogation.

Vortex torque testing system
Computer-controlled Torque Test Systems

Use the Vortex-i for unlimited testing and analysis capability
Optimised for measuring static and rotary torque up to 10 N.m, the versatile Vortex-i is ideal for running sophisticated routines for more demanding product and material tests. With our top-of-the-range Vortex-i systems you gain full programmable control and comprehensive evaluation tools for performing a vast array of torque tests.

2
Tornado Digital Torque Tester
The Tornado is an extremely versatile instrument for measuring low-level torques up to 10N.m. It provides practical operation, combined with advanced features for testing clockwise and counter-clockwise torques easily and accurately.

The Tornado offers enhanced test functions including;

  • Audible and visual pass/fail alarms
  • On-board memory capable of storing up to 500 readings
  • Tamper-evident closure testing characterising 'slip torque' and 'bridge torque'

Key Benefits
Technical Specifications
Accessories

  • Four capacities: 1.5N.m, 3N.m, 6N.m & 10N.m
  • Compact, lightweight and easily portable
  • Mains or battery-powered
  • RS232 output for easy export of results
  • Integrated drip tray captures spillage for easier cleaning
  • Multiple measurement units: mN.m, N.m, lbf.in, ozf.in, kgf.cm, etc

 

 

OUR CLIENTS

HEYETT.COM

Copyright © 2003 - 2021
HEYETT LTD. All Rights Reserved
COMPANY
  • About Heyett
  • Careers
  • Our Support
  • Our Team
  • Our Partners
OUR CORE VALUE
FOLLOW US
 
Powered By Always Technology Services